WMS6TF WALL-MOUNTED SUREFLOW TOUCH-FREE AUTO FILL BOILER

For areas where hygiene is paramount, the new touch-free SureFlow On-Wall Boiler offers 100% contactless access to boiling water thanks to clever infrared sensors.

Selling Points: 

• Touch-Free Dispense (Sensor activated) 

• Choice of water dispense mode - standard push & hold (on-demand) or metered/timed dispense (programmable) 

• Top-up feature - allows user to top-up the drink following a measured dispense. Screen continues to flash for 5 seconds during which time the drink can be topped up. After 5 seconds, it reverts to timed dispense mode
  

• Quick and easy set-up of metered dispense, using memory function
  

• Safety light beam (vessel must be placed within cup recess area, to activate)
  

• Flashing safety message in LC Display (‘Caution Boiling Water’) – safety warning flashes as dispense is activated
  

• Includes easy-fit, spill-tray & bracket kit (place cup on spill-tray – no need to hold whilst boiling water is dispensed) 

• Adjustable Water Temperature (80 to 98^C) – lower temperatures ideal for other drinks e.g. Green Tea 

• Integral, programmable filter-monitor - optional if an external filter or softener has been fitted. Note: monitor is set to ‘Off’ as default but can be activated within ‘program set-up’. (measures water passing through the boiler and reminds the user [via display screen], when to change the filter) 

• High Grade (‘rust free’ 304 Stainless steel construction throughout)
  

• WRAS Approval pending 

Operation: 

Switch boiler on…the display screen will illuminate and read ‘NOT READY’. Once boiler has heated up to the correct pre-set temperature, the LC display changes from Red to White and reads ‘READY’. The water temperature in degrees C is also displayed on the screen. 

Note: The water temperature is factory-set to default; 96 degrees C (recommended). However, the temperature can be adjusted within ‘program set-up’, to between 80 and 98 degrees C. 

To dispense boiling water:

Place a vessel within the recessed cup area. This breaks a safety light beam which in turn, sends a signal to the dispense sensor. The sensor will illuminate brighter, to indicate that it has been activated and ready for use. 

There are two set-up options for dispensing boiling water; 

1. On-demand (water is dispensed for as long as the sensor is activated by the presence of the operator’s hand) 

2. Timed dispense (as soon as sensor is activated by passing a hand/finger in front of the sensor (within 25mm), a pre-set measured dose of water is automatically dispensed). This is ideal where the same size of cup/pot is always used. 

Flashing Safety Warning: Whenever the boiler dispenses boiling water, a ‘CAUTION BOILING WATER’ message will flash in the display window, reminding the user to exercise caution. 

Top-up Feature: In addition, at the end of the measured dispense cycle, the CAUTION’ message will continue to flash for a further 5 seconds. During this 5-second window, the water level in the cup or teapot can be ‘topped-up’ by simply passing hand/finger across the front of sensor to activate and top-up the drink (Note: Once the CAUTION message stops flashing, the top-up facility ends, and the boiler reverts back to timed dispense mode).  

SPECIFICATION FOR DB600-TFW Wall-mounted SureFlow Touch-Free Auto Fill Boiler